EONE Fire Engine Teaser
https://youtu.be/r9VkLblcr0o E-ONE Fire Engine Training video and simulator produced by ISEC
ISEC Teaser
https://youtu.be/JyAST5NZJgw Safety Video Produced by ISEC For more information Please visit our websites:
Movie Trailer of ISEC Safety Video and animation About Ammonia tank Rupture in Petrochemical Company
https://youtu.be/q8V7hYA9asM On August 8, 2011, an Ammonia tank ruptured due to over pressurization during start-up. Large amount of ammonia released forcing all workers evacuate the area. ISEC investigated about this incident and produces the safety video and animation.
Fire Engine Foam Tank and Water Tank
https://youtu.be/SfX0EWvOJaQ A polypropylene booster tank with the capacity of 1000 Gallons, is installed on the Fire Apparatus. The tank is mounted on hard rubber cushions to isolate the tank from road shock and vibration. The water tank can be filled by an external source through the water fill tower located on the top of the…
Fire Engine Water Pump
https://youtu.be/bXi2jQjbLqA In this fire engine, Hale QMax 200-23S Model pump is applied. Hale pumps are centrifugal pumps and cover a range of capacities from 750 Gallons Per Minute (3,000 Liters Per Minute) up to 2,250 GPM (8,000 LPM).
Manifold in Fire Engine
https://youtu.be/83JuPJC-Is4 The foam pump discharges foam concentrate into the manifold of foam header.
Foam Liquid Injection Pump
https://youtu.be/17R6lM54Tdg The Edwards Model pump is a standard-duty high-speed gear driven positive-displacement rotary pump with gear-type rotors.
Foam check valve in Fire Engine
https://youtu.be/83JuPJC-Is4 If metering valves are not working properly or foam pump stops, the water pressure overcomes the foam pressure and water enters into the manifold. Consequently, a check valve is installed between foam manifold and each metering valve to prevent backflow of water into the foam system.
Pressure Relief Valve in Fire Engine
https://youtu.be/wLQg0KuT2Ec A pressure relief valve is supplied on the foam system and When system is set to the manual switch position, at pressure higher than 250 PSI the relief valve will open and foam flow is returned to the suction side of the pump to protect foam system components from over-pressure conditions. How does the…
Ratio Flow Controllers in Fire Engine
https://youtu.be/N2Nlhllwx08 Foam concentrate is pumped from the tank or remote source and discharged through manifold and then, metering valves to the individual ratio flow controllers. Each water discharge, that is dedicated for foam operation is equipped with a ratio flow controller that proportions foam concentrate into the water line. Ratio flow controllers are modified venturi…